A Shutter Motor is a high-performance electrical device used to automate the opening and closing of shutters, roller doors, or security grilles. Designed for convenience and safety, these motors eliminate the need for manual lifting and provide smooth, reliable, and silent operation. Modern shutter motors are built to handle heavy loads, withstand harsh environmental conditions, and offer precise control over shutter motion. With safety features such as obstacle detection, limit switches, and thermal protection, they are ideal for residential, commercial, and industrial applications. Key benefits include: Ease of use — operate shutter with wall switch or remote control Enhanced safety — protects against overloads, jam-ups Durability — designed to handle frequent use and adverse weather Quiet operation — reduces noise while running Energy efficiency — optimized motor design for low power draw
Technical Specifications Parameter Value Model name / type (e.g. “Smart Shutter Motor 35-Nm”) Power supply voltage 220-240 V AC / 110-120 V AC (single phase) / or 24 V DC in low-voltage models Frequency (if AC) 50 / 60 Hz Motor Power Rating e.g. 180 W (varies by torque and load) Maximum Torque e.g. 35 Nm Max Load Capacity e.g. up to 70 kg shutter weight (depending on type and shaft) Windowo Speed / RPM e.g. ~5 rpm under full load; no-load speed higher (may have dual-speed or quiet mode) Elero +1 Running Time / Duty Cycle e.g. 7 minutes continuous under load, then rest; intermittent / cyclic duty Limit Switch Type Mechanical or electronic (automatically or manually set endpoints) Windowo +1 Noise Level ≤ 48 dB (depending on the model) at nominal load Windowo Protection Rating e.g. IP44 or IP54 (resistance to dust / water spray) Ambient Operating Temperature e.g. -20 °C to +50 °C Cable / Wiring Supplied cable length (e.g. 1.5 m), wire gauge (e.g. 4 × 0.75 mm²) Windowo +1 Shaft / Tube Diameter e.g. 45 mm tubular motor shaft Windowo Installation Features Manual override in case of power failure; overheat protection; overload protection; obstacle detection; soft start/soft stop; suitable for wet/damp locations Morr +1 Weight e.g. ~2.8 kg for motor only (varies widely) Windowo Certifications / Standards CE / TUV / EN60335-1, EN60335-2-97 or similar for safety; compliance with local electrical codes.
